There are several occasions when you need to drain a swimming pool. Whether you need to do it because of repairs or maintenance, or due to poor water quality. While pool draining may appear to be a simple task, some pools aren’t designed for draining and require particular care. Before you start, there’s a lot to think about.
Draining a Swimming Pool: How to Start
If you just start draining water out of your pool with a garden hose, you may end up wasting a lot of time, money, and effort. The best thing you can do is research how to drain a pool properly. There are three basic ways to drain your pool: manually, with the help of suction pumps, and by using an automatic system that doesn’t require your supervision.
When to Drain a Pool
Some jurisdictions have restrictions regarding when you may drain your pool. In general, you should avoid draining your pool during the summer months when water levels are low and precipitation is scarce. If you live in an area with a lot of rainfall, it’s best to wait until there’s been at least a week of dry weather before beginning the drainage process.
How to Drain a Swimming Pool
There are numerous techniques for emptying a swimming pool, and the best option will be determined by the sort of swimming pool and its filtration system.
Manual Draining
The most common way to drain water out of the swimming pool is by using a sump pump. This is a simple process that can be done in just a few hours. You will need to have the pool’s water level as low as possible before starting this procedure, so you might want to consider how much time and effort it would take if your only option was draining manually (using hoses).
Suction Pumps
To remove large amounts of water without too many problems, suction pumps are probably the best option available on today’s market for how to drain a swimming pool. These devices use either electrical or solar power; they work by using powerful vacuum pressure instead of physical labor which makes them less tiring than manual options – not to mention faster! If you don’t know how much water there is left in your swimming pool, you can use a suction pump to get an approximate measurement; simply lower the pump into the water and see how long it takes to fill up a five-gallon bucket. Be sure that the output of your pump is submerged below the water level in your pool before turning it on or you’ll just be wasting time and energy!
Once you have determined how much water needs to be drained, attach the appropriate-sized hose to your suction pump and place the other end in an area where the drainage will not cause any damage (such as a storm drain, ditch, or creek). Turn on the pump and wait until all of the desired water has been evacuated from your swimming pool – could take anywhere from several hours to a few days.